-
BaseMaterial
TG130 is the most common used material. High TG FR-4 has better flame retardance than normal FR-4. High Frequency board can carry over 1GHz signal. Aluminum Board has a good performance in heat radiation. Rigid-Flex board can be flexible partly.
- FR4 TG135
- FR4 TG150
- FR4 TG170
- FR4 TG180
- CEM-3
-
No. of Layers
How many circuit layers in your design.
- 1 layer
- 2 layers
- 4 layers
- 6 layers
- 8 layers Other:
-
PCB Dimensions
Board thickness tolerance is +/-10%. You can customize the stackup in your file.
- * * Units in mm
- 0
-
PCB Quantity
You can put demand quantity
- 无
-
PCB Thickness
Board thickness tolerance is +/-10%. You can customize the stackup in your file.
- 0.60
- 0.80
- 1.00
- 1.20
- 1.60 Other:
-
Solder Mask
This paramenter is for solder mask color.
- Green
- Red
- Yellow
- Blue
- White
- Black
- Purple
- Matt Green Other:
-
Surface Finish
HASL is short for Hot Air Solder Level. ENIG is short for Electroless Nickel/Immersion Gold, also known as soft gold. Hard gold is also known as plating gold. Hard gold is often used for golden finger.
- Gold Finger
- Green
- HASL
- HASL Lead Free
- ENIG
- OSP Other:
-
Copper Weight
1oz means 0.035mm copper thickness, 2oz means 0.070mm copper thickness. Etc.. You can customize the stackup in your file.
- 1oz.
- 2oz.
- 3oz. Other:
-
Minimum Drill Hole Size
The minimum drill hole size required in the PCB. Drill hole sizes under 0.3mm are much more difficult to produce. For batch production please ensure hole size is more than 0.3mm.
- 0.2mm Other:
-
Trace Width / Spacing
The minimum width of the traces and the minimum space between traces in your design. If your design needs to be batch produced, please ensure that the width and spacing is greater than 6 mil.
- 4/4mil Other:
-
Blind or Buried Vias
Whether or not your boards require blind or buried vias. The online quotation is for blind vias or buried vias. If your board is more complex, you may be contacted for extra charges.
- Yes
- No
-
Impedance Control
Control the impedance of traces. Help to control single ended impedance and differential impedance
- Yes
- No
-
Quality Control
Follow the quality standard
- IPC Class 2
- Name:
- Remark
this order contains gold finger need quote offline !
estimate：
-
No. of Layers
How many circuit layers in your design.
- 1 layer
- 2 layers
- 4 layers
- 6 layers
- 8 layers Other:
-
PCB Dimensions
Board thickness tolerance is +/-10%. You can customize the stackup in your file.
- * * Units in mm
- 0
-
PCB Quantity
You can put demand quantity
- 无
-
PCB Thickness
Board thickness tolerance is +/-10%. You can customize the stackup in your file.
- 0.60
- 0.80
- 1.00
- 1.20
- 1.60 Other:
-
Solder Mask
This paramenter is for solder mask color.
- Green
- Red
- Yellow
- Blue
- White
- Black
- Purple
- Matt Green Other:
-
Surface Finish
HASL is short for Hot Air Solder Level. ENIG is short for Electroless Nickel/Immersion Gold, also known as soft gold. Hard gold is also known as plating gold. Hard gold is often used for golden finger.
- Gold Finger
- Green
- HASL
- HASL Lead Free
- ENIG
- OSP Other:
-
Copper Weight
1oz means 0.035mm copper thickness, 2oz means 0.070mm copper thickness. Etc.. You can customize the stackup in your file.
- 1oz.
- 2oz.
- 3oz. Other:
-
Minimum Drill Hole Size
The minimum drill hole size required in the PCB. Drill hole sizes under 0.3mm are much more difficult to produce. For batch production please ensure hole size is more than 0.3mm.
- 0.2mm Other:
-
Trace Width / Spacing
The minimum width of the traces and the minimum space between traces in your design. If your design needs to be batch produced, please ensure that the width and spacing is greater than 6 mil.
- 4/4mil Other:
-
Blind or Buried Vias
Whether or not your boards require blind or buried vias. The online quotation is for blind vias or buried vias. If your board is more complex, you may be contacted for extra charges.
- Yes
- No
-
Impedance Control
Control the impedance of traces. Help to control single ended impedance and differential impedance
- Yes
- No
-
Quality Control
Follow the quality standard
- IPC Class 2
- Name:
- Remark
this order contains gold finger need quote offline !
estimate：
-
No. of Layers
How many circuit layers in your design.
- 1 layer
- 2 layers
- 4 layers
- 6 layers
- 8 layers Other:
-
PCB Dimensions
Board thickness tolerance is +/-10%. You can customize the stackup in your file.
- * * Units in mm
- 0
-
PCB Quantity
You can put demand quantity
- 无
-
PCB Thickness
Board thickness tolerance is +/-10%. You can customize the stackup in your file.
- 0.60
- 0.80
- 1.00
- 1.20
- 1.60 Other:
-
Solder Mask
This paramenter is for solder mask color.
- Green
- Red
- Yellow
- Blue
- White
- Black
- Purple
- Matt Green Other:
-
Surface Finish
HASL is short for Hot Air Solder Level. ENIG is short for Electroless Nickel/Immersion Gold, also known as soft gold. Hard gold is also known as plating gold. Hard gold is often used for golden finger.
- Gold Finger
- Green
- HASL
- HASL Lead Free
- ENIG
- OSP Other:
-
Copper Weight
1oz means 0.035mm copper thickness, 2oz means 0.070mm copper thickness. Etc.. You can customize the stackup in your file.
- 1oz.
- 2oz.
- 3oz. Other:
-
Minimum Drill Hole Size
The minimum drill hole size required in the PCB. Drill hole sizes under 0.3mm are much more difficult to produce. For batch production please ensure hole size is more than 0.3mm.
- 0.2mm Other:
-
Trace Width / Spacing
The minimum width of the traces and the minimum space between traces in your design. If your design needs to be batch produced, please ensure that the width and spacing is greater than 6 mil.
- 4/4mil Other:
-
Blind or Buried Vias
Whether or not your boards require blind or buried vias. The online quotation is for blind vias or buried vias. If your board is more complex, you may be contacted for extra charges.
- Yes
- No
-
Impedance Control
Control the impedance of traces. Help to control single ended impedance and differential impedance
- Yes
- No
-
Quality Control
Follow the quality standard
- IPC Class 2
- Name:
- Remark
this order contains gold finger need quote offline !
estimate：
-
No. of Layers
How many circuit layers in your design.
- 1 layer
- 2 layers
- 4 layers
- 6 layers
- 8 layers Other:
-
PCB Dimensions
Board thickness tolerance is +/-10%. You can customize the stackup in your file.
- * * Units in mm
- 0
-
PCB Quantity
You can put demand quantity
- 无
-
PCB Thickness
Board thickness tolerance is +/-10%. You can customize the stackup in your file.
- 0.60
- 0.80
- 1.00
- 1.20
- 1.60 Other:
-
Solder Mask
This paramenter is for solder mask color.
- Green
- Red
- Yellow
- Blue
- White
- Black
- Purple
- Matt Green Other:
-
Surface Finish
HASL is short for Hot Air Solder Level. ENIG is short for Electroless Nickel/Immersion Gold, also known as soft gold. Hard gold is also known as plating gold. Hard gold is often used for golden finger.
- Gold Finger
- Green
- HASL
- HASL Lead Free
- ENIG
- OSP Other:
-
Copper Weight
1oz means 0.035mm copper thickness, 2oz means 0.070mm copper thickness. Etc.. You can customize the stackup in your file.
- 1oz.
- 2oz.
- 3oz. Other:
-
Minimum Drill Hole Size
The minimum drill hole size required in the PCB. Drill hole sizes under 0.3mm are much more difficult to produce. For batch production please ensure hole size is more than 0.3mm.
- 0.2mm Other:
-
Trace Width / Spacing
The minimum width of the traces and the minimum space between traces in your design. If your design needs to be batch produced, please ensure that the width and spacing is greater than 6 mil.
- 4/4mil Other:
-
Blind or Buried Vias
Whether or not your boards require blind or buried vias. The online quotation is for blind vias or buried vias. If your board is more complex, you may be contacted for extra charges.
- Yes
- No
-
Impedance Control
Control the impedance of traces. Help to control single ended impedance and differential impedance
- Yes
- No
-
Quality Control
Follow the quality standard
- IPC Class 2
- Name:
- Remark
this order contains gold finger need quote offline !
estimate：
-
No. of Layers
How many circuit layers in your design.
- 1 layer
- 2 layers
- 4 layers
- 6 layers
- 8 layers Other:
-
PCB Dimensions
Board thickness tolerance is +/-10%. You can customize the stackup in your file.
- * * Units in mm
- 0
-
PCB Quantity
You can put demand quantity
- 无
-
PCB Thickness
Board thickness tolerance is +/-10%. You can customize the stackup in your file.
- 0.60
- 0.80
- 1.00
- 1.20
- 1.60 Other:
-
Solder Mask
This paramenter is for solder mask color.
- Green
- Red
- Yellow
- Blue
- White
- Black
- Purple
- Matt Green Other:
-
Surface Finish
HASL is short for Hot Air Solder Level. ENIG is short for Electroless Nickel/Immersion Gold, also known as soft gold. Hard gold is also known as plating gold. Hard gold is often used for golden finger.
- Gold Finger
- Green
- HASL
- HASL Lead Free
- ENIG
- OSP Other:
-
Copper Weight
1oz means 0.035mm copper thickness, 2oz means 0.070mm copper thickness. Etc.. You can customize the stackup in your file.
- 1oz.
- 2oz.
- 3oz. Other:
-
Minimum Drill Hole Size
The minimum drill hole size required in the PCB. Drill hole sizes under 0.3mm are much more difficult to produce. For batch production please ensure hole size is more than 0.3mm.
- 0.2mm Other:
-
Trace Width / Spacing
The minimum width of the traces and the minimum space between traces in your design. If your design needs to be batch produced, please ensure that the width and spacing is greater than 6 mil.
- 4/4mil Other:
-
Blind or Buried Vias
Whether or not your boards require blind or buried vias. The online quotation is for blind vias or buried vias. If your board is more complex, you may be contacted for extra charges.
- Yes
- No
-
Impedance Control
Control the impedance of traces. Help to control single ended impedance and differential impedance
- Yes
- No
-
Quality Control
Follow the quality standard
- IPC Class 2
- Name:
- Remark
